کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
539394 1450358 2014 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Model-based breakdown of resist and mask contributions to local CDU for sub-30-nm contact holes in EUV lithography
موضوعات مرتبط
مهندسی و علوم پایه مهندسی کامپیوتر سخت افزارها و معماری
پیش نمایش صفحه اول مقاله
Model-based breakdown of resist and mask contributions to local CDU for sub-30-nm contact holes in EUV lithography
چکیده انگلیسی


• Local critical dimension uniformity of sub-30 nm contact holes is a concern in EUVL.
• Resist and mask contributions to local CDU are assessed in three independent ways.
• Three budget breakdown methods show consistently 80% of resist contribution.
• Reduced PEB temperature accompanies 5% relative decrease of resist contribution.
• Experiments imply photon shot noise could potentially be the biggest contributor.

The resist and mask contributions to the local critical dimension uniformity (L.CDU) of 30-nm contact holes (CHs) printed using extreme ultra-violet lithography (EUVL) are decomposed quantitatively by three independent budget breakdown methods. An asymptotic behavior model is proposed for the prediction of the resist-only contribution via a shifted and averaged multiple exposure (SAME) method that statistically averages out the collective mask local contributions. The other two budget breakdown methods of assessing, the variance of site-to-site difference for the derivation of resist-only contribution and the global mask error enhancement factor (G.MEEF) for the mask-only contribution, are performed and compared to the resist and mask contributions from the SAME method. The three budget breakdown methods consistently indicate that approximately 75–80% of L.CDU is attributed to the resist and process regardless of the process conditions, such as post exposure bake (PEB) temperature, PEB time, and exposure dose. L.CDU exhibits a linear correlation with 1/sqrt(dose), which is a potential indication that photon shot noise (PSN) could be a key contributor to the L.CDU on a wafer. Although a significant reduction of the total L.CDU is observed in the low PEB temperature process, i.e., high exposure dose, a relatively small change in the ratio of the resist-to-mask contribution may be observed because the chemical contrast enhancement by acid diffusion reduction is relatively small compared to PSN reduction.

Figure optionsDownload as PowerPoint slide

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Microelectronic Engineering - Volume 123, 1 July 2014, Pages 48–53
نویسندگان
, , , , ,