کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
540838 | 871349 | 2007 | 12 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Fabrication on uniform plating-based flip chip solder bumps after reflow process using a polishing mechanism Fabrication on uniform plating-based flip chip solder bumps after reflow process using a polishing mechanism](/preview/png/540838.png)
This paper presents an innovative polishing process aimed at leveling rough surface of plating-based flip chip solder bumps so as to get uniform coplanarity across the whole substrate after both electroplating and reflow processes. This polishing mechanism is characteristic of combining mechanical-dominated polishing force with slight chemical reaction together. A large number of extremely but inevitably rugged mushroom-like structures after electroplating are drastically smoothed down with the help of this newly-developed polishing process. Nearly 70 μm solder bumps in height with two different profiles as square and circle on the substrates reach as flatly as ±3 μm between different substrates after reflow process; ±2.5 μm in single substrate; and even ±1 μm in die, respectively. Besides, surface roughness among the solder bumps is simultaneously narrowed down from Ra 0.6 to Ra 0.03 along with the coplanarity improvement. Excellent uniformity and smooth surface roughness in solder bumps are absolutely beneficial to pile up and deposit in the following steps in MEMS and semiconductor fields.
Journal: Microelectronic Engineering - Volume 84, Issue 1, January 2007, Pages 60–71