Effects of annealing schedule on orientations of Bi3.2Nd0.8Ti3O12 ferroelectric films prepared by metalorganic solution deposition

Fatigue-free Bi3.2Nd0.8Ti3O12 ferroelectric thin films were successfully prepared on p-Si(1 1 1) substrate using metalorganic solution deposition process. The orientation and formation of thin film under different annealing schedules were studied using XRD and AFM. XRD analysis indicated that (2 0 0)-oriented films with degree of orientation of I(200)/I(117) = 2.097 and 0.466 were obtained by preannealing the film at 400 °C for 10 min followed by rapid thermal annealing at 700 °C for 3 min, 10 min and 20 min, respectively, (0 0 8)-oriented film with degree of orientation of I(008)/I(117) = 1.706 were obtained by rapid thermal annealing the film at 700 °C for 3 min without preannealing, and (0 0 8)-oriented film with degree of orientation of I(008)/I(117) = 0.719 were obtained by preheating the film from room temperature to 700 °C at 20 °C/min followed by annealing for 10 min. The a-axis and c-axis orientation decreased as increase in annealing time due to effects of (1 1 1)-oriented substrate. AFM analysis further indicated that preannealing at 400 °C for 10 min followed by rapid thermal annealing at 700 °C for 3 min resulted in formation of platelike crystallite parallel to substrate surface, however rapid thermal annealing at 700 °C for 3 min without preannealing resulted in columnar crystallite perpendicular to substrate surface.