کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5458331 | 1516169 | 2017 | 33 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructural evolution, phase constitution and mechanical properties of directionally solidified Mg-5.5Zn-xGd (x = 0.8, 2.0, and 4.0) alloys
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Microstructural evolution, phase constitution and mechanical properties of directionally solidified Mg-5.5Zn-xGd (x = 0.8, 2.0, and 4.0) alloys Microstructural evolution, phase constitution and mechanical properties of directionally solidified Mg-5.5Zn-xGd (x = 0.8, 2.0, and 4.0) alloys](/preview/png/5458331.png)
چکیده انگلیسی
The microstructural evolution, phase constitution and mechanical properties of directionally solidified Mg-5.5Zn-xGd (x = 0.8, 2.0, and 4.0) alloys were firstly investigated under G = 30 K/mm at a wide range of V (10 μm/s - 100 μm/s). It was confirmed that there existed α(Mg) + I(Mg3Zn6Gd) in Mg-5.5Zn-0.8Gd alloy, and α(Mg) + I(Mg3Zn6Gd) + W(Mg3Zn3Gd2) in Mg-5.5Zn-(2.0, 4.0)Gd alloys, respectively. The criterion growth rate for cellular-columnar dendrite transition (CDT) for Mg-5.5Zn-xGd alloys decreased with the increase of Gd content. The relationships between the microstructural parameters (λ1, λ2) and V for Mg-5.5Zn-xGd alloys were established using a linear regression analysis. The values of λ1 and λ2 decreased exponentially with the increase of V and the exponent values were found to be close to the theory values of 1/4 and 1/3, respectively. The tensile test showed that the room temperature ultimate tensile strength (UTS) increased and the elongation decreased with the increase of the growth rate for a certain composition of Mg-5.5Zn-xGd alloy. For a certain growth rate, UTS first increased from 0 wt % to 2.0 wt % of Gd content, and then decreased with the further increase of Gd content. The directionally solidified Mg-5.5Zn-2.0Gd experimental alloy showed the maximum ultimate tensile strength.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 725, 25 November 2017, Pages 145-154
Journal: Journal of Alloys and Compounds - Volume 725, 25 November 2017, Pages 145-154
نویسندگان
Guangyu Yang, Shifeng Luo, Shaojun Liu, Lei Xiao, Wanqi Jie,