کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5460241 | 1516193 | 2017 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of the precipitation of the η-Ni3Al0.5Nb0.5 phase on the microstructure and mechanical properties of ATI 718Plus
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Some research showed that the precipitation of η-Ni3Al0.5Nb0.5 phase at grain boundary can optimize the mechanical properties and reduce the notch sensitivity of the nickel-based superalloy ATI 718Plus. Therefore, finding the optimum concentration and morphology of η-Ni3Al0.5Nb0.5 for different operating conditions is of great importance during the microstructure design process. In this study, the relationship between the mechanical properties as well as notch sensitivity and the η-Ni3Al0.5Nb0.5 content in ATI 718Plus was investigated by subjecting the alloy to different heat treatment processes. The stress rupture life of ATI 718Plus was found to improve significantly by decreasing the η-Ni3Al0.5Nb0.5 content. However, the notch sensitivity drastically increased when the η-Ni3Al0.5Nb0.5 mass percentage dropped below approximately 1.1 wt%. The microstructure of the samples was analyzed by field emission scanning electron microscopy and the phase composition was quantitatively determined by electrolytic phase isolation followed by a micro-chemical and X-ray diffraction analysis. The atomic distribution of elements in the alloy on a nanoscale was determined by 3DAP technique. The phase diagram and time-temperature-transformation curve of the different phase were calculated using the JMatPro6.0 software. Furthermore, the precipitation kinetics of the η-Ni3Al0.5Nb0.5 and γⲠphases and the optimum η-Ni3Al0.5Nb0.5 mass percentage in 718Plus were discussed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 701, 15 April 2017, Pages 635-644
Journal: Journal of Alloys and Compounds - Volume 701, 15 April 2017, Pages 635-644
نویسندگان
Minqing Wang, Jinhui Du, Qun Deng, Zhiling Tian, Jing Zhu,