Preparation and characterization of linseed oil-filled urea–formaldehyde microcapsules and their effect on mechanical properties of an epoxy-based coating

• Urea–formaldehyde microcapsules were prepared via in situ polymerization.
• Effect of core:shell ratios and mixing speeds were studied using various methods.
• Epoxy coatings containing linseed oil-filled microcapsules were prepared.
• Effect of capsule size and wt% on self-healing and tensile properties was studied.
• Optimal properties were obtained for 900 rpm-prepared capsules and 5 wt% loading.

In this study, urea–formaldehyde based microcapsules containing linseed oil were prepared via in situ polymerization method. Microcapsules with a regular spherical shape, 10–300 μm diameter and an oil content of 63–77 wt% were synthesized in various core:shell ratios and different mixing speeds. The effect of core:shell ratio and mixing speed on the size and morphology of the microcapsule were studied using optical microscopy, SEM and particle size analysis. Epoxy-based coatings containing various amounts of microcapsules were prepared and the effect of microcapsule size and loading on the mechanical properties and healing performance were evaluated by measuring the tensile properties and corrosion performance of the coatings. The amount of the oil released in the scratched coating was determined both practically and theoretically and the results were compared.The results showed that the addition of microcapsules reduces the tensile properties of the coating, the extent of which depends on the microcapsule size and loading wt%. For instance, sample containing 3 wt% of the microcapsules with an average particle size of 53 μm showed 8.6% reduction in tensile modulus. Optical microscopy of the scratched sample revealed that with increasing microcapsules’ size and loading, the crack was filled more effectively and this led to an improved corrosion performance. Finally, the optimum combination of self-healing and mechanical properties was found to be for the coating containing 5 wt% of microcapsules, with an average particle size of 53 μm.

Figure optionsDownload as PowerPoint slide