Energy recovery by PRO in sea water desalination plant

• Our PRO system was used concentrated brine and treated wastewater.
• Hollow fiber membrane module examined in our PRO prototype plant.
• UF membrane treatment and the chemical dosing made the operation available.
• Energy reduction for sea water reverse osmosis is possible by our PRO system.

Sea water reverse osmosis (SWRO) would face some problems like energy saving and management of concentrated brine. To solve these problems at the same time, the energy recovery by Pressure Retarded Osmosis (PRO) was proposed in the Mega-ton Water System project. Prototype plant test was conducted using concentrated brine from SWRO plant and fresh water from regional waste water treatment facility. Hollow-fiber membrane module were examined in the prototype plant and the test operation was carried out for more than one year. We have reached the maximum membrane power density, 13.5 W/m2, using 10-in. module. Followings were still existing obstacles for further effective PRO. It was also challenging how to get clean fresh water from waste or river water without additional cost. Innovative new technologies were also required to address these concerns. We have also estimated plant cost and surveyed financial impacts on the energy saving of SWRO operation, based on the situation of currently operated SWRO plants worldwide, especially about the Mega-ton scale ones. Those studies indicated that potential market of PRO was 1–2 GW, and 10% energy saving was possible on the Megaton scale SWRO plants. Those results indicate that the commercialization plant would be available very near future.