Detection of windthrown trees using airborne laser scanning

- Difference between two elevation models reveals windthrown trees.
- Template matching automatically locates windthrown trees in the difference image.
- 38% detection rate at individual tree level evaluated on 651 field measured trees.
- Aggregated to 40 m grid cells, at least one tree was found in 77% of the cells.
- Higher detection rate for larger trees and pine.

In this study, a method has been developed for the detection of windthrown trees under a forest canopy, using the difference between two elevation models created from the same high density (65 points/m2) airborne laser scanning data. The difference image showing objects near the ground was created by subtracting a standard digital elevation model (DEM) from a more detailed DEM created using an active surface algorithm. Template matching was used to automatically detect windthrown trees in the difference image. The 54 ha study area is located in hemi-boreal forest in southern Sweden (Lat. 58°29′ N, Long. 13°38′ E) and is dominated by Norway spruce (Picea abies) with 3.5% deciduous species (mostly birch) and 1.7% Scots pine (Pinus sylvestris). The result was evaluated using 651 field measured windthrown trees. At individual tree level, the detection rate was 38% with a commission error of 36%. Much higher detection rates were obtained for taller trees; 89% of the trees taller than 27 m were detected. For pine the individual tree detection rate was 82%, most likely due to the more easily visible stem and lack of branches. When aggregating the results to 40 m square grid cells, at least one tree was detected in 77% of the grid cells which according to the field measurements contained one or more windthrown trees.