کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
644514 1457124 2016 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Effect of the bend geometry on the two-phase frictional pressure drop and flow behaviour in the vicinity of the bend
ترجمه فارسی عنوان
اثر هندسه خمشی بر افت فشار اصطکاک دو فاز و رفتار جریان در مجاورت خم
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی


• Two-phase pressure drop in the vicinity of a sharp return bend is investigated.
• Four different bend geometries tested in upward- and downward oriented flow.
• Capacitance time traces used to assess bend effect on two-phase flow.
• Void fraction and wave activity are derived from capacitance signal.
• Correlation between observed flow behaviour and the observed pressure drop.

The effect of a sharp return bend on the two-phase flow frictional pressure drop close up-and downstream of the bend is investigated. The measurements are performed for refrigerant R134a at mass fluxes ranging from 200 to 500 kg/m2 s. Four bend geometries are tested, with inner channel diameters ranging from 4.93 mm to 8.1 mm and the curvature ratio between 2.55 and 4.43. For both up-and downward oriented flow the main bend effect on the frictional pressure drop is observed close downstream of the return bend. However, for downward oriented flow a decrease in pressure drop is observed and for upward flow an increase is found. To assess the effect the underlying flow behaviour, the void fraction time trace is analysed. The average void fraction and wavelet variance of the void fraction signal can be used to explain the trends in the frictional pressure drop. The correlation between the frictional pressure drop and the flow behaviour indicators is investigated quantitatively for the different geometries.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 104, 5 July 2016, Pages 403–413
نویسندگان
, , , ,