کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
647055 | 1457171 | 2012 | 12 صفحه PDF | دانلود رایگان |

Since most of the world's electric energy production is mainly based on fossil fuels and need for better efficiency of the energy conversion systems is imminent, mathematical programming algorithms were applied for the simulation and optimization of a detailed model of an existing lignite-fired power plant in Kozani, Greece (KARDIA IV). The optimization of its overall thermal efficiency, using as control variables the mass flow rates of the steam turbine extractions and the fuel consumption, was performed with the use of the simulation and optimization software gPROMS. The power plant components' mathematical models were imported in software by the authors and the results showed that further increase to the overall thermal efficiency of the plant can be achieved (a 0.55% absolute increase) through reduction of the HP turbine's and increase of the LP turbine's extractions mass flow rates and the parallel reduction of the fuel consumption by 2.05% which also results to an equivalent reduction of the greenhouse gasses. The setup of the mathematical model and the flexibility of gPROMS, make this software applicable to various power plants.
► Modeling and simulation of the flue gases circuit of a specific plant.
► Designing of modules in gPROMS FO (Foreign Objects).
► Simulation of the complete detailed plant with gPROMS.
► Optimization using a non-linear optimization algorithm of the plant's efficiency.
Journal: Applied Thermal Engineering - Volume 48, 15 December 2012, Pages 256–267