Numerical investigation of heavy fuel droplet-particle collisions in the injection zone of a Fluid Catalytic Cracking reactor, part II: 3D simulations

- Simulation of droplet-particle collisions using 3D CFD two-phase flow model.
- Evaporation and surface reactions (2-lump scheme) are taken into account.
- Parametric investigation on drop size, impact velocity and particle temperature.
- Investigation of a realistic 9-particle cluster configuration.
- Gasoil conversion levels are predicted for different collision scenarios.

This study investigates the collisions between heavy gasoil droplets and solid catalytic particles taking place at conditions realized in Fluid Catalytic Cracking reactors (FCC). The computational model utilizes the Navier-Stokes equations along with the energy conservation and transport of species equations. The VOF methodology is used in order to track the liquid-gas interface, coupled with a dynamic local grid refinement technique in order to minimize the computational cost. Phase-change phenomena, as well as catalytic cracking surface reactions (2-lump scheme) are taken into account. In this paper, the numerical model is extended to investigate the droplet-particle collision process in three dimensions. In order to save computational resources, only half of the droplet is investigated, by imposing symmetry conditions. Firstly, single droplet-catalyst collisions are simulated and compared against the corresponding ones provided by 2D axisymmetric simulations and afterwards, the model is applied for the characterization of the collision dynamics between a single droplet and a particle cluster, i.e. a realistic 3D particle configuration. As the droplet flows through the space between the catalytic particles, important phenomena are observed, such as a) drop levitation due to the formed vapour layer and b) a thin liquid sheet formation, both of which affect the rate of gasoline production, as well as predictions for liquid pore blocking mechanism; a phenomenon frequently observed industrially. Results indicate that gasoline production decreases when the collision target is a particle cluster, instead of same number (as many as in the cluster) single catalysts, as the corresponding contact area decreases.

248