Nonlinear flow and heat transfer dynamics of impinging jets onto slightly-curved surfaces

The nonlinear flow and heat transfer characteristics for a slot-jet impinging on slightly-curved surfaces are experimentally studied here. The effects of curved surface geometry and jet Reynolds number on the jet velocity distribution and circumferential Nusselt numbers are examined. Two different slightly-curved surface geometries of convex and concave are used as target surfaces. The nozzle geometry is a rectangular slot, and the dimensionless nozzle-to-surface distance equals to L∗ = 8. The constant heat fluxes are accordingly applied to the surfaces to obtain an impingement cooling by the air jet at ambient temperature. The measurements are made for the jet Reynolds numbers of Re = 8617, Re = 13 350 and Re = 15 415 for both curved surfaces. The velocity distributions of issuing jet from the nozzle exit to the target surface are obtained by a highly sensitive hot-wire anemometer. The T-type thermocouples are used to measure local temperatures of both the air jet and the plates. Two-dimensional velocity measurements show that the surfaces are remained out of the potential core region for all Re tested here. New correlations for local, stagnation point, and average Nusselt numbers as a function of jet Reynolds number and dimensionless circumferential distance are reported. The correlations reveal that the impinging cooling rate is higher with the concave surface and increase with increasing Re.