Numerical evaluation of the energetic performances of structured and random packed beds in regenerative thermal oxidizers

Regenerative thermal oxidizers (RTO) can be conveniently used to control volatile organic components (VOC) emissions, because of their thermal efficiency and cost effectiveness.In the RTO technology, beds of inert material are used in order to heat the polluted air by cooling burnt gases, through a sequence of cyclic operations which cut the fuel requirements.A computational 1D unsteady model, able to account for both structured and random packed bed regenerators, is developed and applied to realistic plant conditions. Process thermal efficiency and gas pressure drop are calculated as functions of the system geometry and operating parameters.The code can be usefully employed in the analysis and design of RTO systems and in order to choose the more suitable type of regenerator, structured or random packed bed (even considering various particle shapes).Energetic performances of both random and structured regenerators were compared, showing that the first ones exhibit a little higher thermal efficiency but also an elevated pressure drop, at a same value of exchange surface per unit volume of the bed. Random packed bed regenerators resulted less attractive from the energetic point of view and their usage is advisable if their lower cost satisfy economical requirements.