کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6534345 | 1420645 | 2018 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Novel Na2SO4-NaCl-ceramic composites as high temperature phase change materials for solar thermal power plants (Part I)
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
کاتالیزور
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The eutectic Na2SO4-NaCl salt was investigated as a novel high temperature phase change material for solar thermal energy storage due to its low cost and melting point (626.0 °C) interested. The measured melting point and heat of fusion of the eutectic salt are 625.3 °C and 263.3 J/g, which are in agreement with their theoretical values. The eutectic salt shows good thermal stability after 100 melting-freezing thermal cycles in the range of 550-680 °C in air. Three types of the eutectic Na2SO4-NaCl-ceramic composites have been designed and evaluated to address the salt' corrosion issues with containment materials. Results show that eutectic Na2SO4-NaCl/both α-alumina and mullite composites with a mass ratio of salt to ceramics of 1:1 (wt%) have good thermal stability without cracking as well as with weight losses of 0.50% and 0.74% and the decrease of latent heat by 1% and 2% respectively after 20 thermal cycles, where no phase separation and chemical reaction occur. Their measured melting temperature and latent heat are consistent with their theoretical values. Addition of α-alumina and mullite to the eutectic Na2SO4-NaCl salt can reduce the eutectic Na2SO4-NaCl salt' supercooling. In contrast, the sample of the Na2SO4-NaCl/diatomite composite cracked after the cycles.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Solar Energy Materials and Solar Cells - Volume 178, May 2018, Pages 74-83
Journal: Solar Energy Materials and Solar Cells - Volume 178, May 2018, Pages 74-83
نویسندگان
Yifeng Jiang, Yanping Sun, Rhys D. Jacob, Frank Bruno, Sean Li,