The effect of liquid film evaporation on flow boiling heat transfer in a micro tube

Flow boiling in micro channels is attracting large attention since it leads to large heat transfer area per unit volume. Generated vapor bubbles in micro channels are elongated due to the restriction of channel wall, and thus slug flow becomes one of the main flow regimes. In slug flow, sequential bubbles are confined by the liquid slugs, and thin liquid film is formed between tube wall and bubble. Liquid film evaporation is one of the main heat transfer mechanisms in micro channels and liquid film thickness is a very important parameter which determines heat transfer coefficient. In the present study, liquid film thickness is measured by laser focus displacement meter under flow boiling condition and compared with the correlation proposed for an adiabatic flow. The relationship between liquid film thickness and heat transfer coefficient is also investigated. Initial liquid film thickness under flow boiling condition can be predicted well by the correlation proposed under adiabatic condition. Under flow boiling condition, liquid film surface fluctuates due to high vapor velocity and shows periodic pattern against time. Frequency of periodic pattern increases with heat flux. At low quality, heat transfer coefficients calculated from measured liquid film thickness show good accordance with heat transfer coefficients obtained directly from wall temperature measurements.