Two-phase flow behaviour and pressure drop of R134a in a smooth hairpin

Adiabatic two-phase flow of refrigerant R-134a in a hairpin was studied. The hairpin consists of a smooth tube with an inner diameter of 8 mm and with a bend radius of 11 mm. Because of the forces exerted on the flow in the bend, the flow needs to redevelop downstream of the U-bend. The effects of this phenomenon on the pressure drop are studied and linked to visual observations of the flow. Pressure drop and videos of the flow behaviour are recorded in the straight sections upstream and downstream of the bend. These are then compared to the flow and pressure drop for developed flow. The pressure drop downstream of the bend was consistently higher than that for developed flow. It exceeded the pressure drop for developed flow by an average of 30% for all data points. Each video of the flow behaviour was reduced to a single image by calculating the standard deviation of the time signal of each pixel. The standard deviation profiles were compared in order to quantitatively evaluate the change of the flow behaviour. The flow recovery downstream of the bend stretches out over more than 30 tube diameters.