3D optical coherence tomography as new tool for microscopic investigations of nucleate boiling on heated surfaces

Boiling phenomena are an important aspect in security and efficiency for technical applications with high heat flux like nuclear reactors. This study presents optical coherence tomography (OCT) as a novel modality for three-dimensional and two-dimensional time resolved imaging of nucleate boiling on heated surfaces on a microscopic scale with high spatial (<10 μm) and temporal (>25 frames per second) resolution. Within this study, a borosilicate glass plate coated with an optically transparent and electrically conductive indium tin oxide (ITO) layer with a thickness of approximately 100 nm was used as heating surface. The combination of these two properties allows optical inspection of the nucleate boiling from the backside by OCT focused on the formation, growth and detachment of single bubbles. We demonstrated for the first time that OCT is an excellent tool to acquire two-dimensional and three-dimensional images of the base of vapor bubbles from the backside of the heated surface. The acquired images allow for instance the temporally resolved measurement of the bubble diameter, diameter of the bubble base and the contact angle. Exploiting the phase information of the acquired OCT signal stacks allows imaging the movement of the bubble surrounding fluid. We think that OCT will provide many new insights into the boiling phenomena at the bubble base. The recent enhancement of the acquisition rates of OCT systems will facilitate four-dimensional imaging of single bubble evaporation procedures in the nearer future.