کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6607883 459536 2016 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Preparation of nickel-cobalt nanowire arrays anode electro-catalyst and its application in direct urea/hydrogen peroxide fuel cell
ترجمه فارسی عنوان
آماده سازی الکترو کاتالیزور آنودایز نانوسیم کبالت و استفاده از آن در سلول سوختی اوره / پراکسید هیدروژن مستقیم
کلمات کلیدی
سلول سوختی، اوره، آرایه نانوسیم نیکل کبالت، قالب پلی کربنات آب اکسیژنه،
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
چکیده انگلیسی
Nickel-cobalt nanowire arrays (Ni-Co NWAs) electrode is prepared by one-step galvanostatic electrodeposition with a polycarbonate membrane as the template. By adjusting the Co proportion in the Ni and Co bath solution into 10%, the optimal Ni-Co NWAs electrode in terms of relatively lower onset potential and highest current density towards urea electro-oxidation is obtained. Its catalytic performance is investigated by constructing single direct urea/hydrogen peroxide (H2O2) fuel cell. Results show that a peak power density of 7.4 mW cm−2 and an open circuit voltage of 0.92 V are achieved at room temperature when 9.0 mol L−1 KOH and 0.33 mol L−1 urea are used as the anolyte, H2SO4 and H2O2 as the catholyte. Additionally, the urea/H2O2 fuel cell also demonstrates excellent stability during short term duration test.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Electrochimica Acta - Volume 199, 1 May 2016, Pages 290-296
نویسندگان
, , , , ,