Measurement and prediction of pressure drop in a two-phase micro-pin-fin heat sink

This study concerns pressure drop in a two-phase heat sink containing an array of staggered square micro-pin-fins having a 200 × 200 μm2 pin cross-section by a 670 μm pin height. Three inlet temperatures of 30, 60 and 90 °C, and six maximum mass velocities for each inlet temperature, ranging from 183 to 420 kg/m2 s, were tested. Frictional pressure drop in the boiling region is deemed the dominant pressure drop component. The Lockhart–Martinelli correlation for laminar liquid–laminar vapor combination in conjunction with a previous single-phase friction factor correlation can adequately predict the data. Micro-pin-fins offer better flow stability than parallel micro-channels.