Low symmetric metallophthalocyanine modified electrode via click chemistry for simultaneous detection of heavy metals

Beside different methods and materials used to develop electrochemical sensors, the modification of the electrode using click reaction based on metallophthalocyanine (MPc) compounds are shown to improve the stability and sensitivity of the sensor. This work reported the development of electrochemical sensor for mercury (II), Lead (II), copper (II) and cadmium (II) ions detection based on the synthesized novel low symmetry alkyne terminated cobalt Phthalocyanine (CoPc) derivative. Differential pulse stripping voltammetry (DPSV) technique was employed for the first time in simultaneous determination of trace levels of the above metal ions using modified glassy carbon electrode (GCE) via click chemistry. Under the optimum experimental conditions, the anodic peak current is proportional to the concentrations of metal ions over a wide range of 0 to 0.1 mM with nanolevel detection limit of 81.94, 327.71, 55.87 and 347.06 nM and the sensitivity of 866.23 ± 5.48, 215.82 ± 2.16, 1979.48 ± 11.47 and 204.50 ± 1.10 μA/mM for Hg(II), Cu(II), Pb(II) and Cd(II), respectively. The selectivity of the clicked-CoPc modified GCE toward Hg(II), Cu(II), Pb(II), Cd(II) present no interference from these metals ions. The fabricated electrochemical sensor exhibited very good electrochemical properties such as good reproducibility, stability, reusability and is suitable for the detection of heavy metal ions in tap water in our laboratory.