The analysis of simultaneous clove/oregano and clove/thyme supercritical extraction

The goal of present work was to investigate and explain kinetics and mass transfer phenomena occurring during the SFE from the mixture of two plants with different initial composition. The extractions from pure clove, oregano and thyme as well as from clove/oregano (C/O) and clove/thyme (C/T) mixtures with various initial compositions of plant material were carried out using supercritical CO2 at 10 MPa and 40 °C. The results indicated that presence of light compounds in supercritical CO2 originated from the oregano leaves or thyme at the beginning of extraction process increases the extraction rate of compounds from clove bud. Only small added amounts of oregano or thyme to clove bud (C/O - 90:10%, w/w; or C/T - 84:16%, w/w) in the starting plant mixture had the same effect resulted in the similar and the highest increase of the extraction rate and had negligible influence on total extraction yield compared to extract isolated from pure clove. Different mathematical models were used for simulation of experimental data which showed that the highest increase of the solubility of extractable compounds in supercritical CO2 as well as the highest mass transfer rate in the solid phase during extractions existed during extraction from C/O (90:10, w/w) and C/T (84:16, w/w) mixtures. Decrease of SC CO2 consumption or shorter time of extraction necessary for achieving desired extract yield in the case of SFE of the clove buds could be important for industrial-scale application.