کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
668336 | 1458743 | 2014 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Thermal characterization of anisotropic materials by integral transforms taking into account the thermal coupling with the sample-holder
ترجمه فارسی عنوان
خصوصیات حرارتی مواد انجایلی از طریق تبدیل های انتگرالگیر با توجه به جفت حرارتی با نگهدارنده نمونه
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
Integral transforms - تبدیل یکپارچهInfraRed Thermography - ترموگرافی InfraRedThermal characterization - خصوصیات حرارتیHigh temperature - درجه حرارت بالاFlash method - روش فلشInverse method - روش معکوسorthotropic material - مواد OrthotropicAnisotropic material - مواد غیر انعکاسیThermal diffusivity - نفوذ گرمائی
ترجمه چکیده
در این مقاله روشی برای تعیین درجه حرارت مواد مضر با توجه به جفت شدن نمونه و دارنده آن ارائه شده است. اصالت این کار این است که از اندازه گیری های دما ساخته شده توسط دوربین مادون قرمز در لبه های نمونه استفاده کنید و آنها را به عنوان شرایط مرزی برای از بین بردن حضور پشتیبانی معرفی کنید. با استفاده از اصل انطباق و تبدیل یکپارچه سازگار، با استفاده از یک روش تکراری ممکن است به طور همزمان به دست آوردن خواص مواد در جهات آنیزوتراپی مختلف خود را با روش کوچکترین مربع که به هارمونیک های فضایی فیلد دما اعمال می شود، بدست آورید. این روش با استفاده از یک شبیه سازی قبل از اعمال اندازه گیری های تجربی، با یک تبدیل کلاسیک فوریه-کوزین معتبر و مقایسه می شود.
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
چکیده انگلیسی
In this paper, a method for thermal characterization of anisotropic materials taking into account the coupling between the sample and its holder is presented. The originality of this work is to use temperature measurements made by infrared camera on the edges of the sample and introduce them as boundary conditions to get rid of the presence of the support. Using the principle of superposition and adapted integral transforms, it is then possible by an iterative method to obtain simultaneously the material properties in its different anisotropy directions by a least squares method applied to the spatial harmonics of the temperature field. This method is validated and compared with a classical Fourier-Cosine transform through a simulation before being applied to experimental measurements.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Thermal Sciences - Volume 79, May 2014, Pages 67-75
Journal: International Journal of Thermal Sciences - Volume 79, May 2014, Pages 67-75
نویسندگان
Christophe Rodiet, Benjamin Remy, Alain Degiovanni,