کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6718382 503531 2016 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
A statistical approach to scaling size effect on strength of concrete incorporating spatial distribution of flaws
ترجمه فارسی عنوان
یک رویکرد آماری به مقیاس اندازه اثر بر قدرت بتن با استفاده از توزیع فضایی معایب
کلمات کلیدی
بتن، استحکام، اثر اندازه، رویکرد آماری، مکانیزم شکستگی، شباهت هندسی،
ترجمه چکیده
توزیع مکانی نقاط ضعف در جامد تأثیر مستقیم بر احتمال احتمالی شکست به علت شکست شکننده دارد. بر این اساس، دو پارامتر کامپوزیت که شامل احتمال تجمعی شکست و حجم ناحیه فرسایش شونده هستند شناسایی شده و برای اندازه گیری اثر اندازه بر مقاومت بتن مشخص می شوند. به جای پیش فرض یک تابع خاص، تابع توزیع تجمعی از قدرت شکست، یعنی احتمال تجمعی شکستگی، برای پواسون یا توزیع فضایی یکنواخت معیوب از تحلیل همگام شده از مجموعه داده های چندگانه اندازه گیری شده از مختلف نمونه های اندازه ای از شباهت هندسی تحت یک حالت بارگذاری مشابه (مقیاس متناسب). این رویکرد برای مورد مقیاس متناسب با ارزیابی سه مجموعه نماینده از داده های قدرت منتشر شده از بتن از تنش دو طرفه، آزمون دو طرفه و انعطاف پذیری انعطاف پذیر معتبر است. با توجه به اندازه نمونه خاص، توزیع عیوب فضایی ممکن است به دنبال پیام های پواسون یا قانون یکنواخت باشد، در حالی که توزیع قدرت بتن لزوما همیشه از آمار وایبل نمی پیوندد.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
The spatial distribution of flaws in a solid has a direct impact on the cumulative probability of failure due to brittle fracture. Accordingly, two composite parameters incorporating the cumulative probability of failure and the volume of fracture process zone are identified and adopted to characterize the size effect on the strength of concrete. Instead of being pre-assumed a specific function, the cumulative distribution function of fracture strength, namely the cumulative probability of fracture, is inferred for either the Poisson or the uniform spatial distributions of flaws from the synchronized analysis of multiple strength data sets measured from different sized specimens of geometrical similarity under a same loading mode (proportional scaling). This approach is validated for the case of proportional scaling by evaluating three representative sets of published strength data of concrete from uniaxial tension, uniaxial and equibiaxial flexure tests. Depending on the specific specimen size, the spatial flaw distribution may follow either the Poisson postulates or the uniform law, while the strength distribution of concrete does not necessarily always follow the Weibull statistics.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Construction and Building Materials - Volume 122, 30 September 2016, Pages 702-713
نویسندگان
, ,