کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6719491 | 503537 | 2016 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fabrication of adiabatic foam by sodium silicate with glass fiber as supporting body
ترجمه فارسی عنوان
تولید فوم آدیاباتیک توسط سیلیکات سدیم با فیبر شیشه ای به عنوان بدن حمایت
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
فوم آدیاباتیک، فیبر شیشه ای، هدایت حرارتی، تراکم، قدرت فشرده سازی،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
چکیده انگلیسی
Fabrication of adiabatic foam by sodium silicate with glass fiber as supporting body was researched in this paper. The variation of the thermal conductivity, density, and compression strength with the sintering temperature, modulus of sodium silicate and glass fiber content were characterized. The results show that through sintering at 450 °C with 3.3 modulus of sodium silicate and less than 0.67 wt.% content of glass fiber, the adiabatic foam with 0.0454-0.0459 W/m K of thermal conductivity, 74-80 kg/m3 of density, and 0.42-0.46 MPa of compression strength can be obtained. Therefore, this adiabatic foam has a large potential of thermal insulation application.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Construction and Building Materials - Volume 112, 1 June 2016, Pages 933-939
Journal: Construction and Building Materials - Volume 112, 1 June 2016, Pages 933-939
نویسندگان
Ye Li, Xudong Cheng, Wei Cao, Lunlun Gong, Ruifang Zhang, Heping Zhang,