کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6736511 | 1429055 | 2018 | 14 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Experimental study of the mechanical behavior of timber-concrete shear connections with threaded reinforcing bars
ترجمه فارسی عنوان
بررسی تجربی رفتار مکانیکی اتصالات برشی بتونی بتن با نوارهای تقویتی رشته
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
اتصال برشی، تخته و الوار بتن، فشار دادن تقویت میله های فولادی، نکته
ترجمه چکیده
این مقاله نتایج آزمایشگاهی آزمایش های خالی بر روی سیستم های اتصال ساده بتن را ارائه می دهد. پیکربندی های تست شده مربوط به قطعه بدون میله، میله بدون ضخامت و قطعه ترکیب شده به میله است. میله توسط نوار فولادی تقویت شده معمولی که در انتهای آن رشته ای تشکیل شده و در تخته تخته چوب پیچ شده است، تشکیل شده است. این اتصال دهنده ها با اتصالات مستطیلی یا مثلثی بین چوب و بتن ترکیب شده اند. این راه حل ها انتخاب شده اند زیرا در ساختار کامپوزیت بتونی بتن ساده با استفاده از مواد موجود در بازار محلی ساده می شوند. خواص مکانیکی مانند قدرت، مدول لغزش و حالت شکست نمونه های آزمایش شده از منحنی بار لغزش آزمون های خروجی بدست می آید. مقایسه ها برای ارزیابی تفاوت ها و شباهت های مختلف اتصالات برشی مورد آزمایش انجام شده است. مقایسه ها نشان می دهد که کارایی سیستم های کامپوزیت ساده اتصالات مورد آزمایش با استفاده از میله های فولادی تقویت شده به تنهایی و یا همراه با اتصال پلاک در تخته پرتلند نشان داده شده است.
موضوعات مرتبط
مهندسی و علوم پایه
علوم زمین و سیارات
مهندسی ژئوتکنیک و زمین شناسی مهندسی
چکیده انگلیسی
This paper presents the experimental results of push-out tests on simple timber-concrete connection systems. The tested configurations concern the notch without rod, the rod without notch and the notch combined to rod. The rod is composed by common reinforcing steel bar threaded at their extremity and screwed in the timber beam. These fasteners are combined with rectangular or triangular notch connections between timber and concrete. These solutions are chosen because they are simple to apply in a timber-concrete composite structure using materials available in the local market. The mechanical properties such as the strength, the slip modulus and the failure mode of the tested specimens are obtained from the load-slip curves of the push-out tests. The comparisons are done to evaluate the differences and similarities between the various tested shear connections. The comparisons show the efficiency of the simple composite systems of connections tested using the reinforcing steel bars alone or combined with a notch connection in the timber beam.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Structures - Volume 172, 1 October 2018, Pages 997-1010
Journal: Engineering Structures - Volume 172, 1 October 2018, Pages 997-1010
نویسندگان
Decroly Denouwe Djoubissie, Adamah Messan, Eric Fournely, Abdelhamid Bouchaïr,