کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6738298 1429067 2018 14 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Shear performance of a novel demountable steel-concrete bolted connector under static push-out tests
ترجمه فارسی عنوان
عملکرد برش یک اتصال دهنده فلزی بتونی قابل جدا شدن بر اساس آزمون های کششی استاتیک است
کلمات کلیدی
ساختار کامپوزیت فولادی، کانکتور قابل جدا شدن، تست کشش، ظرفیت برشی برشی، منحنی بار لغزش، سختی برشی،
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات مهندسی ژئوتکنیک و زمین شناسی مهندسی
چکیده انگلیسی
Bolted connectors could be an alternative to replace conventional welded headed studs between steel girders and concrete slabs, which may benefit prefabricated construction and replacement of concrete slabs considering the life-cycle design of steel-concrete composite structures. In this paper, a novel steel-concrete bolted connector, consisting of a short bolt, a long bolt and a coupler, is proposed. Compared with other bolted connectors, this bolted connector could render the dismantling of concrete slabs more convenient. To investigate the failure mode and fundamental mechanical behaviour of novel bolted connectors and to compare their shear performance with that of conventional welded headed studs, static push-out tests were implemented on four groups of bolted connector specimens and one group of welded stud specimens. The test results demonstrate that the failure mode of novel bolted connectors is that shanks of short bolts are sheared off directly without local concrete crushing phenomenon under couplers. The shear bearing capacity is about 0.8 times of the tensile strength of short bolts, and the peak slip of the steel-concrete interface grows as the bolt shank diameter increases. The exponential expression which generally describes load-slip curves of welded stud connectors simulates the test load-slip curves of novel bolted connectors well. The clearance between bolt shank and bolt hole has a significant effect on the shear stiffness of novel bolted connectors.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Structures - Volume 160, 1 April 2018, Pages 133-146
نویسندگان
, , , ,