کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6740763 504364 2014 15 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Behavior of stud connectors under combined shear and tension loads
ترجمه فارسی عنوان
رفتار اتصالات استوانه ای تحت بارهای برشی و کششی ترکیب شده
کلمات کلیدی
پلهای کامپوزیت اتصال دانشجویی، برش ترکیبی و تنش، تست مدل، قدرت تعامل،
ترجمه چکیده
به منظور بررسی رفتار اتصالات گل میخ دربرابر بارهای برشی و کششی ترکیب شده، دوازده کشش، شش پانل خالی و دوازده نمونه تغییر یافته اصلاح شده تهیه و مورد آزمایش قرار گرفتند. حالت های شکست در شرایط بارگذاری مختلف ارائه و مقایسه می شود. بر اساس نتایج هفتاد و شش آزمایش در این کار و آنهایی که در ادبیات موجود است، یک معادله مقاومت برشی بین تنش بهبود یافته پیشنهاد شده است. علاوه بر این، عبارات برای محاسبه فاکتور کاهش سختی برشی و پیش بینی نسبت لغزش باربری در بارگذاری ترکیبی نیز توسعه یافته است. نتایج نشان می دهد که هر دو پدیده تغییر شکل و گرد و غبار برای حالت شکست فولاد ستون ها تحت بارگذاری ترکیبی مشاهده می شود. با افزایش نیروی کششی اعمال شده، هر دو سختی برشی و مقاومت برشی بطور قابل توجهی کاهش می یابد. فاکتور کاهش مقاومت سفتی برشی و بیان لغزش بار می تواند تاثیر نیروی کششی و لغزش پیک را در نظر بگیرد و به این ترتیب، پیش بینی های معقولانه سفتی برشی و منحنی بار لغزش تحت بارگذاری برشی و بارگذاری ترکیبی را ارائه می دهد. معادله استحکام پیشنهادی می تواند پیش بینی کننده قدرت متقابل دقیق تر، در مقایسه با سایر معادلات موجود در ادبیات، و نشان می دهد که اثرات متقابل را می توان نادیده گرفت زمانی که نیروی برشی یا تنش کوچکتر از 10٪ از قدرت نهایی زیر خالص برش یا تنش خالص به ترتیب.
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات مهندسی ژئوتکنیک و زمین شناسی مهندسی
چکیده انگلیسی
In order to investigate the behavior of stud connectors subjected to combined shear and tension loads, twelve pull-out, six push-out and twelve modified push-out specimens were prepared and tested. Failure modes under different loading conditions are presented and compared. Based on the seventy-six test results in this work and those available in the literature, an improved shear-tension interaction strength equation is proposed. In addition, expressions for computing the shear stiffness reduction factor and predicting the load-slip relation under combined loading are also developed. The results indicate that both the shear deformation and necking phenomenon are observed for the steel failure mode of studs under combined loading. With an increase in applied tension force, both the shear stiffness and shear strength decrease significantly. The proposed shear stiffness reduction factor and load-slip expression can take into account the influence of tension force and peak slip, and thus give more reasonable predictions of shear stiffness and load-slip curve under shear loading and under combined loading. The proposed interaction strength equation is capable of predicting the interaction strength more accurately, when compared with other available equations in the literature, and suggests that interaction effects can be neglected when the shear or tension force is smaller than 10% of the ultimate strength under pure shear or pure tension, respectively.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Structures - Volume 81, 15 December 2014, Pages 362-376
نویسندگان
, , ,