کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6741444 504386 2013 16 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Experimental characterization and modeling of energy dissipation in reinforced concrete beams subjected to cyclic loading
ترجمه فارسی عنوان
خصوصیات تجربی و مدل سازی از اتلاف انرژی در پرتو های بتونی تقویت شده تحت بارگذاری چرخه ای
کلمات کلیدی
دمیدن، آزمایشات خمشی سه نقطه، مدل آسیب دیدگی بتن آرمه، بارگذاری چرخه معکوس،
ترجمه چکیده
روش مدل سازی پدیده کمینه شدن در تجزیه و تحلیل تاریخی غیرخطی همچنان یک سوال باز است و همچنان یک چالش انگیزشی در جامعه علمی است. رویکرد شناخته شده در نظر گرفتن نیروهای چسبناک غیر فیزیکی است که متناسب با میدان سرعت هستند. ماتریس محرک باید تعریف شود و شناسایی آن بر اساس ملاحظات فیزیکی نیست. این مطالعه با هدف بررسی امکان شناسایی یک مدل سازمانی محلی به منظور محاسبه تغییرات در یک روش طبیعی صورت می گیرد. برای رسیدن به این هدف، یک آزمایش تجربی بر پایه تیرهای بتونی تقویت شده تحت آزمون معکوس خمشی سه نقطه معکوس ارائه شده است. این نتایج اجازه می دهد تا با روش دقیق روش هیسترتیک که به پدیده هیسترتیک توجه شود، شناسایی شود. به طور خاص، یک طرح ویژه هیسترتیک به صورت انطباق با صرف انرژی است. سپس آزمایشات ارتعاشی آزاد عددی انجام می شود تا نشان دهد که استفاده از دمایی چسبناک را می توان از بین برد اگر مدل بتن محلی قانونی برای پدیده هیسترتیک به درستی شناسایی شود.
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات مهندسی ژئوتکنیک و زمین شناسی مهندسی
چکیده انگلیسی
The way of modeling the damping phenomenon in nonlinear time history analysis is still an opened question and remains a motivating challenge in the scientific community. The well-known approach lies in considering non-physical viscous forces that are proportional to the velocity field. A damping matrix must be defined and its identification is not based on physical considerations. This study aims at exploring the possibility of identifying a local constitutive model in order to account for damping in a natural way. To reach this objective, an experimental campaign based on reinforced concrete beams subjected to reverse three-point bending tests is presented. These results allow identifying in an accurate way the hysteretic scheme used to take into account the hysteretic phenomenon. In particular, an ad hoc hysteretic scheme is shown to be consistent in terms of energy dissipation. Numerical free vibration tests are then carried out in order to demonstrate that the use of a viscous damping can be avoided if the local constitutive concrete model accounting for hysteretic phenomenon is accurately identified.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Structures - Volume 56, November 2013, Pages 919-934
نویسندگان
, , , ,