Thermal conversion of elephant grass (Pennisetum Purpureum Schum) to bio-gas, bio-oil and charcoal

Elephant grass is an abundant, fast growing plant with significant potential as a renewable energy source and for conversion to higher calorific value fuels. This work investigates thermal conversion of elephant grass to bio-gas, bio-oil and charcoal under two heating rates of 10 and 50 °C/min. The energy required to pyrolyse elephant grass was evaluated using computer aided thermal analysis technique, while composition of the resultant bio-gas and bio-oil products were monitored with gas chromatographic and mass spectroscopic techniques. At 500 °C, the bio-gas compounds consisted primarily of CO2 and CO with small amounts of methane and higher hydrocarbon compounds. The heat of combustion of the bio-gas compounds was estimated to be 3.7–7.4 times higher than the heat required to pyrolyse elephant grass under both heating rates, which confirms that the pyrolysis process can be self-maintained. Faster heating rate was found to increase the amount of liquid products by 10%, while charcoal yields remained almost the same at 30%. The bio-oil mainly consisted of organic acids, phthalate esters, benzene compounds and amides. The amount of organic acids and benzene compounds were significantly reduced at 50 °C/min, while the yields of phthalate esters and naphthalene compounds increased. The difference in bio-oil composition with increased heating rate is believed to be associated with the reduction of the secondary reactions of pyrolysis, which are more pronounced under lower heating rate.