Mesua ferrea L. seed oil based acrylate-modified thermostable and biodegradable highly branched polyester resin/clay nanocomposites

Mesua ferrea L. seed oil based highly branched polyester resin was modified by methyl methacrylate through grafting polymerization technique. The nanocomposites of this acrylate-modified polyester and 1–5 wt% loadings of organically modified montmorrilonite (OMMT) nanoclay were prepared by an ex situ technique using strong mechanical mixing and ultrasonication. Formation of nanocomposites was confirmed by X-ray diffractometeric (XRD), scanning electron microscopic (SEM) and transmission electron microscopic (TEM) analyses. The absence of d0 0 1 reflections of OMMT in XRD and TEM study revealed the partial exfoliation of OMMT by the polymer chain. The homogeneous surface morphology was also ascertained from SEM. Mechanical and thermal studies of the nanocomposites showed an appreciable improvement in tensile strength and thermal stability by OMMT loading. The enhancement of tensile strength by 2.5 times and thermal stability by 32 °C for 5 wt% OMMT filled nanocomposite was observed compared to that of pristine system. The rheological behavior of the nanocomposites was also investigated and shear thinning was observed. Biodegradation of the nanocomposite films was assayed using two strains of Pseudomonas aeruginosa, SD2 and SD3 and one strain of Bacillus subtilis, MTCC736. The nanocomposites exhibited enhanced biodegradability as compared to pristine acrylate modified polyester. All the results showed the potentiality of the nanocomposites as advanced thin film materials for suitable applications.

► Mesua ferrea L. seed oil based polyester was modified by methylmethacrylate.
► The modified polyester was used as matrix for nanocomposite preparation.
► Improvement of mechanical and thermal properties was observed for nanocomposites.