کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7048890 1457138 2015 36 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Evaluation of the non-linearities of a potential axially symmetric model for computing the entrainment ratio of supersonic ejectors
ترجمه فارسی عنوان
ارزیابی غیر خطی های یک مدل متقارن بالقوه محوری به منظور محاسبه میزان جذب اکتشافات صوتی
کلمات کلیدی
ترجمه چکیده
هدف از این تحقیق توسعه یک روش ریاضی برای حل معادله جریان بالقوه متقارن غیر خطی متقارن است که برای پیش بینی نسبت جرم یک انژکتور عامل در رژیم دو چرخه استفاده می شود. یک روش تکراری بر اساس اضافه کردن خطاهای باقی مانده بر روی راه حل خطی شده به عنوان طرح حل و فصل طراحی شده است. اختلافات بین راه حل های غیر خطی و خطی و کاربرد روش غیر خطی به نتایج تجربی، از طریق تحقیقات داخلی و از جاهای دیگر، گزارش شده است. حداکثر انحراف بین راه حلهای خطی شده و غیر خطی، کمتر از 2٪ برای موارد مورد بررسی است، که تأیید اعتبار راه حل خطی شده است. از سوی دیگر، میانگین انحراف معیار نسبت غیرخطی و تجربی کمتر از 7٪ است که کاربرد مدل را اثبات می کند.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
The purpose of this investigation is to develop a mathematical procedure to solve the nonlinear axially symmetric potential flow equation applied to the prediction of the mass ratio of a ejector operating in the double choked regime. An iterative procedure based on adding error residuals upon the linearized solution has been devised as the solving scheme. Discrepancies between nonlinear and linear solutions and the application of the nonlinear method to experimental results, both from an in-house investigation and from elsewhere, are reported. The maximum deviation between the linearized and non-linearized solutions is below 2% for the cases considered, which confirms the validity of the linearized solution. On the other hand, the average deviation between the nonlinear and experimental mass ratio is below 7%, which proves the applicability of the model.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 90, 5 November 2015, Pages 798-808
نویسندگان
, , ,