کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7049019 | 1457150 | 2015 | 21 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Thermal performance of a miniature loop heat pipe using water-copper nanofluid
ترجمه فارسی عنوان
عملکرد حرارتی یک لوله گرمای حلقه مینیاتوری با استفاده از نانوسیم های آب مسی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
لوله گرمای حلقه مینیاتوری، نانو سیال، افزایش انتقال حرارت، خنک کننده الکترونیک،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
چکیده انگلیسی
The implementation of high power density coupled with limited space available in the cooling of electronics demands a highly efficient miniature loop heat pipe (mLHP). This study experimentally investigates the influence of a nanofluid on the thermal characteristics of a specially designed mLHP and explores the mechanism of heat transfer enhancement of the nanofluid in the mLHP. The nanofluid is composed of deionized water and Cu nanoparticles and has an average diameter of 50Â nm. Reductions of 12.8% and 21.7% are achieved in the evaporator wall temperature and total thermal resistance, respectively, while the heat transfer coefficient (HTC) of the evaporator increases 19.5% when substituting the nanofluid with 1.0Â wt% of deionized water at a heat load of 100Â W. There is an optimal mass concentration for the nanofluids, which corresponds to the maximum heat transfer enhancement. The optimal mass concentration is 1.5Â wt%. The thermal performance improvement of the mLHP using the nanofluid results from the reduction of the contact angle, the enhancement of boiling heat transfer, and a deposited nanoparticle coat on the boiling surface.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 78, 5 March 2015, Pages 712-719
Journal: Applied Thermal Engineering - Volume 78, 5 March 2015, Pages 712-719
نویسندگان
Zhenping Wan, Jun Deng, Bin Li, Yanxiao Xu, Xiaowu Wang, Yong Tang,