کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7056640 | 1458053 | 2015 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Pressure drop of water flow across a micro-pin-fin array part 1: Isothermal liquid single-phase flow
ترجمه فارسی عنوان
ریزش جریان آب در یک قسمت آرایه میکرو پین - قسمت 1: جریان تک فاز مایع ایزوترمال
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
میکرو پین باله، سینک حرارتی، خنک کننده مایع تک فاز، افت فشار، فاکتور اصطکاک،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
چکیده انگلیسی
This is part one of a two-part study that investigates water single-phase and two-phase pressure drop across a staggered array of circular micro-pin-fins. This paper presents results of isothermal liquid single-phase flow, and part two adiabatic liquid-vapor two-phase flow. The micro-pin-fins are 180 μm in diameter, 683 μm in height, and 399 μm in both longitudinal and transverse pitches. Seven temperature levels from 23 to 80 °C, and seventeen maximum mass velocities for each temperature, ranging from 133 to 1538 kg/m2 s, were tested. The resulting Reynolds number ranged from 26 to 776. Pressure drop across the micro-pin-fin array was measured, and friction factor calculated. The existing friction factor correlations for micro-pin-fin arrays, conventional-size pin-fin arrays, and tube banks were examined and found unable to predict the data. A numerical simulation was performed, and a good agreement was found between the experimental data and numerical results. A new friction factor correlation was developed that is used in part two of the study on calculating liquid-vapor two-phase pressure drop.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Heat and Mass Transfer - Volume 89, October 2015, Pages 1073-1082
Journal: International Journal of Heat and Mass Transfer - Volume 89, October 2015, Pages 1073-1082
نویسندگان
Jonathan Mita, Weilin Qu,