کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7060823 | 1458697 | 2018 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Multiparametric study of Leidenfrost point and wettability of lubricants on high-pressure die-casting dies
ترجمه فارسی عنوان
مطالعه چند پارامتری از نقطه لیدیفروست و مرطوب بودن روانکارها در قالبهای فشارسنجی فشار بالا
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ریخته گری فشار بالا، روانکاری نقطه لیدنفروست، زاویه تماس،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
چکیده انگلیسی
This work is aimed at improving the lubricant film formation on the die surfaces in high-pressure die-casting (HPDC) pursuing enhancing cooling, temperature homogenization and casting release. An original test procedure was employed to study the Leidenfrost point (LFP) and the contact angle (CA) of various lubricants on die steel grades in the temperature range from 20 to 320 °C. The effects of various parameters such as steel grade, surface roughness, ageing, temperature, droplet size, water hardness and lubricant concentration on LFP and CA were isolated and analysed. It was found that the LFP remarkably increased for aged die surface with fine grains and relatively high roughness. The CA was affected mainly by the type of the lubricant. These findings lay the ground for optimal selection of the HPDC lubrication depending on the specific operating conditions.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Thermal Sciences - Volume 125, March 2018, Pages 66-73
Journal: International Journal of Thermal Sciences - Volume 125, March 2018, Pages 66-73
نویسندگان
Borja Zabala, Amaya Igartua, Valeria Scarpis, Giulio Timelli, Frank Girot, Roman Nevshupa,