کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7071980 | 1459932 | 2016 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Suitability assessment of a continuous process combining thermo-mechano-chemical and bio-catalytic action in a single pilot-scale twin-screw extruder for six different biomass sources
ترجمه فارسی عنوان
ارزیابی مناسب بودن یک فرایند پیوسته در ترکیب اکسترودر پیچ دو طرفه با استفاده از ترومو مونو-شیمیایی و زیست کاتالیزوری برای شش منبع مختلف زیست توده
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
تکنولوژی و شیمی فرآیندی
چکیده انگلیسی
A process has been validated for the deconstruction of lignocellulose on a pilot scale installation using six types of biomass selected for their sustainability, accessibility, worldwide availability, and differences of chemical composition and physical structure. The process combines thermo-mechano-chemical and bio-catalytic action in a single twin-screw extruder. Three treatment phases were sequentially performed: an alkaline pretreatment, a neutralization step coupled with an extraction-separation phase and a bioextrusion treatment. Alkaline pretreatment destructured the wall polymers after just a few minutes and allowed the initial extraction of 18-54% of the hemicelluloses and 9-41% of the lignin. The bioextrusion step induced the start of enzymatic hydrolysis and increased the proportion of soluble organic matter. Extension of saccharification for 24Â h at high consistency (20%) and without the addition of new enzyme resulted in the production of 39-84% of the potential glucose.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Bioresource Technology - Volume 211, July 2016, Pages 146-153
Journal: Bioresource Technology - Volume 211, July 2016, Pages 146-153
نویسندگان
Virginie Vandenbossche, Julien Brault, Oscar Hernandez-Melendez, Philippe Evon, Eduardo Barzana, Gérard Vilarem, Luc Rigal,