کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7117617 1461364 2018 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Influence of etching on structural, optical and photoelectrochemical properties of titanium oxides obtained via thermal oxidation
ترجمه فارسی عنوان
تأثیر اچینگ بر خواص ساختاری، اپتیکی و فوتو الکتروشیمیایی اکسید تیتانیوم به دست آمده از طریق اکسیداسیون حرارتی
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی برق و الکترونیک
چکیده انگلیسی
TiO2 layers were synthesized via thermal oxidation of titanium foil in temperatures ranging from 500 to 900 °C. Prior to oxidation in air, the passivation layer was either removed from the Ti surface by means of etching in concentrated hydrochloric acid at elevated temperatures, or was left on it. An optimal etching time of 30 min was determined experimentally for both 55 and 80 °C. The morphology and crystal structure of TiO2 strongly depend on the microstructure and phase composition of titanium foil, respectively. Rutile was present after oxidation at a temperature as low as 500 °C and in some cases was accompanied by lower titanium oxides and anatase. The highest photocurrent in photoelectrochemical cell was achieved for a photoanode that had been etched and was then oxidized at 600 °C. Rutile and low-resistance, oxygen-deficient lower phases of titanium in combination with a thickness of 200 nm were found to cause efficient charge separation and charge transfer.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science in Semiconductor Processing - Volume 83, 15 August 2018, Pages 159-170
نویسندگان
,