Effects of different precursors on Cu2ZnSnS4 thin film solar cells prepared by sputtering method

In this study, the impacts of different precursors on Cu2ZnSnS4 thin film solar cells were investigated. The two kinds of precursors of (Cu+Sn)/Zn and (Cu+Sn)/ZnS were deposited on Mo-coated soda lime glasses by magnetron sputtering. Cu2ZnSnS4 (CZTS) films based on different precursors were fabricated by soft annealing and following two-step sulfurization in sulphur vapour. The crystal structure, phase purity, surface morphology, composition and optical properties of CZTS films from different precursors were characterized by X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscope (SEM), energy dispersive spectrometry (EDS) and UV-vis-NIR spectroscopy, respectively. As a result, the CZTS thin films with smooth surface and uniform compositional ratio distribution were obtained from the precursors of (Cu+Sn)/ZnS. The best conversion efficiency of the fabricated CZTS film solar cell based on (Cu+Sn)/ZnS precursors was 3.36%.