Failure mode analysis of a diesel motor crankshaft

A failure mode analysis of a diesel motor (110 kW) crankshaft from an automobile vehicle is presented. After 120,000 km in service, an abnormal vibration was detected which was increasing with the time. The diesel motor was first disassembled for determining the root cause, however without success. No defect was detected, but since a suspicion of damage was present, and being this failure recurrent in this type of diesel motor series, the crankshaft was disassembled again. Then the crankshaft was subjected to a simple vibration analysis and a preliminary indication of possible existence of a crack was concluded. The crankshaft was then replaced by a new one, and the old was subjected to a failure analysis for determining the root cause. A crack was found at the crankpin web-fillet and after a complete opening of the crack, the failure analysis showed that fatigue was the dominant failure mechanism. Observations were carried out by optical and Scanning Electronic Microscope. Material defects at the crack initiation zone were not found. The root cause of damage seems to be a misalignment of the main journals and a weakness of design close to the gear at the region where the crack was initiated. Therefore, probably a poor design and a deficient assembling of the crankshaft helical gear coupled to the main journal end was the first cause of the failure.