کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7171769 | 1463748 | 2016 | 40 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fatigue strength scatter characteristics of JIS SUS630 stainless steel with duplex S-N curve
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The scatter behavior of fatigue strength for 17-4 PH stainless steel (JIS SUS630, equivalent to ASTM-A563 Grade 630), which exhibited a duplex S-N curve, was investigated. It was found that the fatigue strength scatter of the SUS630 at 106 and 107 cycles, which were corresponding to the fatigue strengths for the surface-induced and the subsurface-inclusion-induced crack nucleation modes, respectively, were significantly small and comparable to each other. The scatter of inclusion size in the present material was small and resulted in the small scatter of fatigue strength comparable to that for the surface-induced crack nucleation mode. The variation in size of non-metallic inclusions is known as one of the main factors for the fatigue strength scatter (Murakami, 2002) [1]. It was also found that the scatter of fatigue strength was in the same order of tensile strength.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Fatigue - Volume 82, Part 3, January 2016, Pages 371-378
Journal: International Journal of Fatigue - Volume 82, Part 3, January 2016, Pages 371-378
نویسندگان
Sofian Mohd, Md. Shahnewaz Bhuiyan, Defu Nie, Yuichi Otsuka, Yoshiharu Mutoh,