کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
749715 | 894845 | 2006 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fabrication and characterization of In0.52Al0.48As/In0.53Ga0.47As E/D-HEMTs on InP substrates
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی برق و الکترونیک
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Fabrication and characterization of In0.52Al0.48As/In0.53Ga0.47As E/D-HEMTs on InP substrates Fabrication and characterization of In0.52Al0.48As/In0.53Ga0.47As E/D-HEMTs on InP substrates](/preview/png/749715.png)
چکیده انگلیسی
The design, fabrication, and electrical characterization of enhancement-mode HEMTs (E-HEMTs) and depletion-mode HEMTs (D-HEMTs) on a common InP substrate are reported. The integration of E- and D-HEMTs (E/D-HEMTs) is a potentially useful technology for the realization of high-speed, low-power digital circuits. The layer structures for E/D-HEMTs were optimized in terms of the thicknesses of the spacer and Schottky layers and sheet carrier concentration in the channel. The buried-Pt gate technology was utilized to achieve the desired threshold voltages for both 0.15 μm gate E- and D-HEMTs. The fabricated devices exhibited threshold voltages of â0.3 and 0.1 V, peak transconductance (Gm,max) values that are higher than 1020 and 1050 mS/mm, and the voltages where the peak transconductances occurred (Vgp) were 0.0 and 0.4 V for D- and E-HEMTs, respectively. Unity gain cut-off frequencies (fT's) above 190 and 180 GHz were obtained for D-HEMTs and E-HEMTs, respectively.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Solid-State Electronics - Volume 50, Issue 5, May 2006, Pages 758-762
Journal: Solid-State Electronics - Volume 50, Issue 5, May 2006, Pages 758-762
نویسندگان
J.H. Jang, S. Kim, I. Adesida,