کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7612144 | 1493551 | 2015 | 31 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Evaluation of sorbent materials for the sampling and analysis of phosphine, sulfuryl fluoride and methyl bromide in air
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
شیمی آنالیزی یا شیمی تجزیه
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Evaluation of sorbent materials for the sampling and analysis of phosphine, sulfuryl fluoride and methyl bromide in air Evaluation of sorbent materials for the sampling and analysis of phosphine, sulfuryl fluoride and methyl bromide in air](/preview/png/7612144.png)
چکیده انگلیسی
Phosphine (PH3), sulfuryl fluoride (SO2F2) and methyl bromide (CH3Br) are highly toxic chemical substances commonly used for fumigation, i.e., pest control with gaseous pesticides. Residues of fumigation agents constitute a health risk for workers affected, and therefore accurate methods for air sampling and analysis are needed. In this study, three commercial adsorbent tubes; Carbosieve SIIIâ¢, Air Toxics⢠and Tenax TAâ¢, were evaluated for sampling these highly volatile chemicals in air and their subsequent analysis by thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS). The breakthrough volume (BTV) of each fumigant was experimentally determined on the different adsorbents at concentrations at or above their permissible exposure limits, using a method based on frontal chromatography of generated fumigant atmospheres. Carbosieve SIIIâ¢, a molecular sieve possessing a very high specific area, proved to be a better adsorbent than both Air Toxics⢠and Tenax TAâ¢, resulting in at least a 4-fold increase of the BTV50%. BTV50% for Carbosieve SIII⢠at 20 °C was measured as 4.7 L/g, 5.5 L/g and 126 L/g for phosphine, sulfuryl fluoride and methyl bromide, respectively, implying safe sampling volumes of 1.9 L, 2.2 L and 50 L, respectively, for a commercial tube packed with 800 mg Carbosieve SIIIâ¢. The temperature dependence of BTV was strong for Carbosieve SIIIâ¢, showing a reduction of 3-5%/°C in breakthrough volume within the range â20 to 40 °C. Furthermore, although Carbosieve SIII⢠reportedly has a higher affinity for water than most other adsorbents, relative humidity had only a moderate influence on the retention capacity of phosphine. Overall, the applicability of Carbosieve SIII⢠adsorbent sampling in combination with TD-GC-MS analysis was demonstrated for highly volatile fumigants.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Chromatography A - Volume 1375, 2 January 2015, Pages 17-26
Journal: Journal of Chromatography A - Volume 1375, 2 January 2015, Pages 17-26
نویسندگان
R. Magnusson, L. Rittfeldt, C. Ã
stot,