Investigation of failure behavior of two different types of Zircaloy clad tubes used as nuclear reactor fuel pins

Nuclear reactor fuel pins act as barriers to the release of radioactive fission products to the coolant flowing around these thin-walled tubes and hence they prevent the leakage of radioactivity to the surroundings of reactor core. These tubes are of small thickness in order to have less resistance in the path of heat flow from the fuel to the coolant. Investigation of failure behavior of these fuel clad tubes is of utmost importance to the designers and plant operators in order to ensure the maximum residence time of the fuel bundles inside the reactor core as well as to ensure minimal activity during operation and refueling activities. Various types of zirconium based alloys are used to manufacture these pins. The focus is to obtain better strength, ductility, corrosion resistance, oxidation resistance, and minimal creep including those due to irradiation-assisted damage and deformation processes. Two number of such types of alloys, namely, re-crystallization annealed Zircaloy-2 and stress-relief annealed Zircaloy-4, have been investigated in this work for their fracture behavior. As standard fracture mechanics specimens cannot be machined from these thin-walled tubes, non-standard specimens with axial cracks have been used in this work. Load normalization technique has been used to evaluate crack growth during loading of these specimens. It was observed that the re-crystallization annealed Zircaloy-2 specimens have higher initiation fracture toughness as well as higher resistance to crack growth compared to the other type of specimens. In order to understand the micro-structural aspects of the fracture resistance behavior of these materials, further investigation incorporating optical and transmission electron microscopy have also been carried out. It was concluded that the higher fracture resistance behavior of the re-crystallization annealed Zircaloy-2 specimens can be attributed to the presence of finer grain and sub-grain micro-structure, very low dislocation density and other defects in the material.

► Fracture behavior of two types of Zirconium-based alloys has been investigated.
► Non-standard axially-cracked specimens machined from fuel-pins have been tested.
► Load-normalization technique was used to evaluate crack growth during the test.
► RXA Zircaloy-2 specimens have higher resistance to fracture compared to SRA Zry-4.
► SEM study reveals presence of finer grains and cleaner microstructure in RXA Zry-2.