کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7738327 | 1497982 | 2014 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Influences of Alq3 as electron extraction layer instead of Ca on the photo-stability of organic solar cells
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
الکتروشیمی
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Calcium (Ca) is not a desirable candidate as electron extraction layer (EEL) for long-term stability organic photovoltaics (OPVs) on account of its nature of active metal. In this paper, we has selected thieno[3,4-b]thiophene/benzodithiophene (PTB7) and [6,6]-phenyl C71-butyric acid methyl ester (PC71BM) as donor and acceptor, respectively, and the device architecture is Glass/ITO/poly(ethylenedioxythiophene):polystyrene sulphonate (PEDOT:PSS)/PTB7:PC71BM/EEL/Aluminum. For comparison, tris (8-hydroxyquinoline) aluminum (Alq3) and Ca were used as EEL to reveal their influence on the performance [power conversion efficiency (PCE), short-circuit current density (JSC), open-circuit voltage (VOC) and fill factor (FF)] of the OPVs. As a result, PCE of the device with Ca as EEL rapidly reduced over 60% after three days due to the poor stability of Ca. The device with Alq3 as EEL shows favorable stability owing to the PCE moderate declined less than 30% after one month. Furthermore, PCE of the device with Alq3 as EEL was fully comparable to that with Ca as EEL. Our results indicate that Alq3 is an alternative candidate for high-performance and long-term photo-stability OPVs.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Power Sources - Volume 250, 15 March 2014, Pages 105-109
Journal: Journal of Power Sources - Volume 250, 15 March 2014, Pages 105-109
نویسندگان
Zhiyong Liu, Miaomiao Tian, Ning Wang,