کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
78467 | 49332 | 2012 | 7 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Diesters of high-chain dicarboxylic acids with 1-tetradecanol as novel organic phase change materials for thermal energy storage Diesters of high-chain dicarboxylic acids with 1-tetradecanol as novel organic phase change materials for thermal energy storage](/preview/png/78467.png)
A series of diesters of high-chain dicarboxylic acids with 1-tetradecanol (myristyl alcohol) was synthesized by using decanedioic, dodecanedioic and tetradecanedioic acids under vacuum and in the absence of catalyst for the first time. These diesters were particularly investigated in terms of their thermo-physical properties to be further used as phase change materials (PCMs) in thermal energy storage. High purity syntheses were controlled via FT-IR, GC–MS and elemental analyses and thermo-physical properties were determined with differential scanning calorimeter (DSC) and thermo-gravimetric analyzer (TGA). Thermal properties of the diesters were expressed in terms of phase change temperature, enthalpy, specific heat (Cp), thermal decomposition and reliability after 1000 thermal cycles with necessary statistical data. In addition to that, the GC–MS data were also presented to specify the mass fragmentation fingerprints of the diesters. The yield of diester formation was found to be in the range of 95–97%. The DSC analyses indicated that the melting temperatures of the high-chain diesters with myristyl alcohol were between 50 °C and 58 °C with phase change enthalpy above 200 kJ/kg. The results showed that these materials were favorable for low temperature heat transfer applications with successful thermal properties and reliability.
Figure optionsDownload as PowerPoint slideHighlights
► Novel organic phase change materials (PCMs) for thermal energy storage.
► Thermal properties of diesters of high-chain dicarboxylic acids with 1-tetradecanol (myristyl alcohol).
► PCMs with enthalpy above 200 kJ/kg between 50 °C and 58 °C.
► Single sharp phase changes with successful thermal reliability and stability.
► They are favorable for low temperature heat transfer and thermal energy storage applications with negligible supercooling.
Journal: Solar Energy Materials and Solar Cells - Volume 104, September 2012, Pages 102–108