Organic solar cells using a reduced graphene oxide anode buffer layer

We report on a solution processed reduced graphene oxide (rGO) thin films as anode buffer layer in organic solar cells. The spin-coated rGO, and zinc oxide (ZnO) thin films have been used to fabricate bulk heterojunction organic solar cells employing [poly({4,8-di(2-ethylhexyloxyl)benzo[1,2-b:4,5-b′]dithiophene}-2,6-diyl)-alt-({5-octythieno[3,4-c]pyrrole-4,6-dione}-1,3-diyl):fullerene (PBDTTPD:PCBM) blends as a photoactive layer. Atomic force microscopy, X-ray diffraction, UV–vis absorption spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, and photovoltaic measurements were performed to investigate the morphology, materials of processed thin films, and device performance of the fabricated devices. The ZnO also plays an important role in blocking holes, collecting electrons and serves as conducting channels to the cathode top electrode. A short-circuit current density (Jsc) and fill factor (FF), increase when the rGO was introduced, which directly contributed to the improved efficiency to 4.8%.

Good stability of rGO as anode buffer layer.Figure optionsDownload as PowerPoint slideHighlights
► We have fabricated organic solar cells based on rGO as anode buffer layer.
► All layers were coated from solution processed.
► The PCE of the device is 4.88%, where the PCE maintained above 70% after 4 weeks.