کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
79327 | 49352 | 2010 | 4 صفحه PDF | دانلود رایگان |
Hydrogenated microcrystalline silicon (μc-Si:H) solar cells show decreasing open-circuit voltage with increasing crystalline volume fraction (Fc). Therefore, most research groups focus on μc-Si:H films produced close to the transition with amorphous silicon. Three cells with varying Fc and large-grain fraction, Flg have been studied experimentally and by modeling. The large grained fluorinated μc-Si:H cell appears to be an exception to the above rule, and modeling is used to understand why low and high Fc μc-Si:H and μc-Si:F:H are used as the second intrinsic-layer in hypothetical double junction cells. Modeling suggests possible efficiencies of 11.3%, 8.4% and 13%, respectively. Three methods of double junction cell thickness optimization are discussed.
Journal: Solar Energy Materials and Solar Cells - Volume 94, Issue 9, September 2010, Pages 1477–1480