کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7979741 | 1514726 | 2014 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Improving CNT distribution and mechanical properties of MWCNT reinforced alumina matrix
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
In this work, an attempt was made to improve the distribution of CNTs in CNT/alumina nanocomposites. The composite powders containing 1 and 3 vol% of CNTs were produced and calcined at 500 °C for 2 h. Surface coating with boehmite nanoparticles was used to improve CNT distribution in alumina matrix. Calcined powders were shaped into compacted samples by cold isostatic pressing at 180 MPa and sintered at 1600 °C for 2 h in flowing gas atmosphere (95%Ar+5%H2). Phase analysis of the calcined composite powders showed complete transformation of boehmite into gamma-alumina. The maximum flexural strength was 465±31 MPa corresponding to addition of 1 vol% CNTs. Evaluating the fracture toughness via DCM method revealed a constant enhancement and the highest toughness was 4.7±0.3 MPa.m1/2 corresponding to composites containing 3 vol% of CNTs.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 617, 3 November 2014, Pages 110-114
Journal: Materials Science and Engineering: A - Volume 617, 3 November 2014, Pages 110-114
نویسندگان
Hossein Ghobadi, Ali Nemati, Touradj Ebadzadeh, Zahra Sadeghian, Hadi Barzegar-Bafrooei,