کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7990034 | 1516125 | 2018 | 54 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Chromium silicide-based composites fabricated via solid-state reactions: Phase development, oxidation behavior and electrical properties at high-temperatures
ترجمه فارسی عنوان
کامپوزیت های مبتنی بر سیلیسیم کروم ساخته شده از طریق واکنش حالت جامد: توسعه فاز، رفتار اکسیداسیون و خواص الکتریکی در دمای بالا
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
چکیده انگلیسی
The chromium silicide-based electroconductive composites were fabricated by solid-state sintering of chromium silicide and chromium oxide powders at 1370â¯Â°C in argon. The final densified composites were composed of various solid solution and silicide phases (e.g. Cr3Si, Cr5Si3) and silica, depending on the starting silicide/oxide volume ratio ranging from 0.67 to 9.0. Major phases were found to be homogeneously distributed within the metastable (cristobalite) and/or amorphous silica grain boundary phase. The controlled oxidation experiments revealed excellent oxidation resistance at 50°-870â¯Â°C, where low-level oxidation was observed. The composites all displayed a metallic-type electrical conductivity due to the presence of the Cr3Si, Cr5Si3 and CrSi as the major conductive silicide phases. Their electrical conductivities ranged from 42.1 to 213.7â¯S/cm at 1000â¯Â°C. High-temperature annealing of the composites resulted in phase and microstructural changes, which further improved their high-temperature oxidation resistance and electrical transport properties.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 769, 15 November 2018, Pages 430-442
Journal: Journal of Alloys and Compounds - Volume 769, 15 November 2018, Pages 430-442
نویسندگان
Gunes A. Yakaboylu, Katarzyna Sabolsky, Edward M. Sabolsky,