کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8000693 | 1516274 | 2015 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of B and Cr on elastic strength and crystal structure of Ni3Al alloys under high pressure
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Samples of Ni3Al, Ni3Al:B and Ni-Al-Cr super alloys were prepared by directional solidification method and their effect of alloying with ternary elements on the mechanical properties was investigated. In-situ X-ray diffraction studies were carried out on undoped Ni3Al, Ni3Al:B with boron 500 ppm and Ni-Al-Cr with 7.5 at.% of chromium super alloys at high pressure using diamond anvil cell. The results indicate that micro-alloying with B forms γâ²-phase (L12 structure), similar to the pure Ni 3Al, while Ni-Al-Cr alloy consists of γⲠprecipitates in a matrix of γ-phase (Ni-FCC structure). The crystal structure of all three alloys was stable up to 20 GPa. Micro alloying with boron increases bulk modulus of Ni3Al by 8% whereas alloying with chromium has the opposite effect decreasing the modulus by 11% when compared to undoped alloy. Further, the elastic modulus and hardness of Ni3Al, Ni3Al:B and Ni-Al-Cr alloys were determined using the nano-indentation technique, in combination with compressibility data which enabled the estimation of shear modulus and Poisson's ratio of these alloys.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 619, 15 January 2015, Pages 616-620
Journal: Journal of Alloys and Compounds - Volume 619, 15 January 2015, Pages 616-620
نویسندگان
S.V. Raju, A.A. Oni, B.K. Godwal, J. Yan, V. Drozd, S. Srinivasan, J.M. LeBeau, K. Rajan, S.K. Saxena,