کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
80101 | 49373 | 2010 | 4 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Efficient polymer photovoltaic cells using solution-processed MoO3 as anode buffer layer Efficient polymer photovoltaic cells using solution-processed MoO3 as anode buffer layer](/preview/png/80101.png)
Efficient photovoltaic (PV) cells based on regioregular poly(3-hexylthiophene) (P3HT):fullerene derivative [6,6]-phenyl-C61 butyric acid methyl ester (PC61BM) composites have been fabricated by using solution-processed molybdenum oxide (MoO3) as an anode buffer layer. The influence of solution-processed MoO3 anode buffer layer on the device performance of P3HT:PCBM PV cells is investigated as compared to the PV cells with different anode buffer layers including water-soluble poly(ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and the thermally evaporated MoO3. It is found that .the performance of the PV cell with solution-processed MoO3 anode buffer layer is comparable or higher than the devices using PEDOT:PSS or thermally evaporated MoO3 as the anode buffer layer. The power conversion efficiency of PV cell with solution-processed MoO3 anode buffer layer reaches 3.14% under AM1.5G 100 mW/cm2 illumination.
Journal: Solar Energy Materials and Solar Cells - Volume 94, Issue 5, May 2010, Pages 842–845